Table of Contents

• Introduction
• Why Reset the Reverse on Your Harley Trike?
• Tools and Safety Precautions
• Step-by-Step: How to Reset Reverse on a Harley Trike
• Troubleshooting Common Reverse Issues
• Harley Touring Electric Reverse Kit Specifications
• Maintenance Tips to Prevent Future Issues
• Summary Table

Introduction

Harley-Davidson trikes are built for comfort and power, but even the best machines need an occasional reset. If your trike’s electric reverse isn’t functioning correctly, this guide will walk you through how to reset the reverse on a Harley trike, specifically those equipped with the Harley Touring electric reverse kit. Whether you’re dealing with motor lag, a stuck reverse function, or a complete failure, this article provides practical solutions and technical insights.

Why Reset the Reverse on Your Harley Trike?

The reverse system on a Harley trike is a great convenience, but issues can arise from:

• Overuse or overheating of the electric reverse motor
• Electrical glitches or software bugs in the control unit
• Incorrect gear transitions during use
• Battery or voltage issues affecting motor output

Resetting the system can help clear minor faults and restore normal operation.

Tools and Safety Precautions

Essential Tools:

• Multimeter (for checking battery voltage)
• Socket wrench set
• Screwdrivers (Phillips and flathead)
• Gloves and eye protection

Safety Tips:

• Turn off the ignition and remove the key before working.
• Ensure the trike is parked on a level surface.
• Use the parking brake and chock the wheels.

Step-by-Step: How to Reset Reverse on a Harley Trike

Follow these steps to perform a proper reverse reset:

1. Disconnect Battery Power

• Locate the battery under the seat or trunk compartment.
• Disconnect the negative terminal first to avoid any shorts.
• Wait for 5–10 minutes to allow the reverse control module to power down.

2. Inspect the Electric Reverse Fuse

• Locate the fuse box under the side panel.
• Check for a blown reverse fuse and replace if necessary.

3. Reconnect the Battery

• Reconnect the positive terminal first, then the negative terminal.
• Start the trike and shift to neutral.

4. Reset the Control Module

• Turn the ignition to the ON position without starting the engine.
• Engage the reverse switch and listen for a click from the reverse motor relay.
• If no sound, press and hold the reverse button for 5 seconds to reset the circuit.

5. Test the Reverse Function

• Ensure the trike is in neutral.
• Press the reverse button while holding the brake.
• If the reverse motor engages smoothly, the reset is successful.

Troubleshooting Common Reverse Issues

1. Reverse Motor Doesn’t Engage

• Check battery voltage—must be above 12.4V for proper operation
• Inspect the ground connection of the reverse motor

2. Clicking Sound But No Movement

• Check motor terminals for loose wires
• Inspect torque overload settings (excess resistance may trigger safety shutoff)

3. Reverse Works Intermittently

• May be due to overheating—allow motor to cool before retrying
• Update the ECU firmware if a software issue is suspected

Harley Touring Electric Reverse Kit Specifications

The electric reverse mechanism relies on a robust mechanical and electrical design. Below is the technical specification of the Harley Touring Electric Reverse Kit:

This kit is known for its high durability, strong torque output, and reliable performance across extreme temperatures. The CNC-machined components ensure smooth operation with reduced wear over time.

Maintenance Tips to Prevent Future Issues

• Regularly clean terminals and connectors to avoid corrosion.
• Inspect the reverse motor after every 3000 miles of use.
• Do not hold the reverse button continuously for more than 10 seconds—allow the motor to rest.
• Keep firmware updated for electronic control units (if applicable).
• Store the trike in a dry, cool environment to protect electrical components.

Summary Table