Not at all. The Eagle King Reverse Kit is designed for a quick and easy plug-and-play installation, with no drilling or permanent modifications required. Most riders complete the installation in under one hour.

Installation video tutorials are also available at:
👉 eaglekingtech.com/technical-guide

We also offer full installation support to ensure everything goes smoothly, from start to finish.

No. The kit is 100% plug-and-play and non-invasive, meaning it won’t affect your factory warranty. If you switch bikes in the future, you can easily remove the kit and reinstall it on your new motorcycle.

It might look tight at first glance, but there's actually no issue at all checking or filling your oil. Both fill points stay fully accessible with the kit installed. We made sure of that during the design process.

No, it doesn’t. The reverse kit is not driven by the starter motor, but an additional high-power brushless motor. The built-in reversing module is connected to the diagnostic interface via a data cable to obtain and analyze vehicle data in real time to prevent misoperation and make it more convenient to use.

Yes — a modified exhaust can affect the installation if it blocks the area where the reverse kit needs to be mounted.

If that’s your case, you may choose to remove the modified exhaust and reinstall the original one to ensure proper fitment.

If you're unsure about compatibility, feel free to send us a photo of your exhaust setup. Our team will gladly assist you before purchase.
📩 Email: contact@eaglekingtech.com
📞 Phone/text: (302) 208-6923

Yes — any leg-mounted fan, whether factory or aftermarket, must be removed because it occupies the same space where the reverse gear kit is installed.

To maintain airflow and rider comfort, we offer an optional Leg Cooling Fan that’s specially adapted to work with the reverse system. While the reverse kit works perfectly without it, we recommend installing the adapted fan for better heat management.