1. Start the engine, pinch the clutch and release it immediately，press and hold the start button in neutral, and the electronic reverse system can start and start reversing normally. Release the start button to stop reversing, and directly shift to forward gear to drive normally.
2. When reversing normally or on a slope with high rear wheel position, you can hold the front brake, then hold down the start button and hold it, and then release and hold the front brake to achieve a start stop observation while reversing mode.
3. The neutral switch must be functioning properly, and the green N light on the instrument panel must light up normally when in neutral position.
1. Turn on and off the cooling fan, turn on the ignition switch, do not start the engine, hold the front brake and hold down the right turn signal for more than 5 seconds to turn on or off the cooling fan. After turning on the cooling fan, the ambient temperature must reach 28 degrees Celsius, the engine temperature must be 55 degrees Celsius, and the vehicle speed must be below 15km/h to start running.
2. Ladies’ concern, for women and some riders who may feel that the reverse speed is too fast, which may affect reverse safety, you can select reverse high and low gears by holding the front brake and simultaneously holding down the left and right turn signal switches for more than 5 seconds.
Precision-built reverse gear kits for Harley Touring motorcycles. Designed to make every ride easier, safer, and more controlled — in any direction.
